News center
Our exceptional lineup of products and services is sure to satisfy even the most discerning customers.

Decoration of green synthesized S, N

Apr 15, 2023

Scientific Reports volume 12, Article number: 8103 (2022) Cite this article

1557 Accesses

9 Citations

8 Altmetric

Metrics details

An Author Correction to this article was published on 02 August 2022

This article has been updated

Halloysite nanotubes (HNTs) with high active sites are used as natural layered mineral supports. Sulfur- and nitrogen-co doped graphene quantum dots (S, N-GQDs) as conductive additive and CoFe2O4 as the electrocatalyst was decorated on a HNT support to design an effective and environmentally friendly active material. Herein, an eco-friendly CoFe2O4/S, N-GQDs/HNTs nanocomposite is fabricated via a green hydrothermal method to equip developed hydrogen storage sites and to allow for quick charge transportation for hydrogen storage utilization. The hydrogen storage capacity of pure HNTs was 300 mAhg−1 at a current density of 1 mA after 20 cycles, while that of S, N-GQD-coated HNTs (S, N-GQDs/HNTs) was 466 mAhg−1 under identical conditions. It was also conceivable to increase the hydrogen sorption ability through the spillover procedure by interlinking CoFe2O4 in the halloysite nanoclay. The hydrogen storage capacity of the CoFe2O4/HNTs was 450 mAhg−1, while that of the representative designed nanocomposites of CoFe2O4/S, N-GQDs/HNTs was 600 mAhg−1. The halloysite nano clay and treated halloysite show potential as electrode materials for electrochemical energy storage in alkaline media; in particular, ternary CoFe2O4/S, N-GQD/HNT nanocomposites prove developed hydrogen sorption performance in terms of presence of conductive additive, physisorption, and spillover mechanisms.

Clay minerals have been widely exploited for expanding functional nano compounds, owing to the diversity of these silicates to assemble various types of acting species at nano size1,2. Accordingly, different materials, such as nanoparticles, polymers or biological components, can be assembled to create highly diverse nanoconstructions of interest as clay nanocomposites for applications in energy storage, catalyst reactions and sensors, among other demands3,4.

Several reports have been considered for applying clay minerals for energy storage applications in different energy storage devices, such as membranes, electrolytes and electrodes. Halloysite nanotubes (HNTs) are a tubular clay with structural details of 50 nm in diameter, 600–900 nm in length and 15 nm for the inner lumen5,6. Halloysite is a distinctive material that is constructed by rolling kaolin sheets into multiwalled mesoporous nanotubes. The surface of halloysite is created by alumina (lumen surfaces) and silica (other surfaces)7,8. Its outstanding features include hollow construction, high porosity, tunable surface characteristics, low cost, versatile surface functionalization and easy preparation9,10,11,12,13. Surface modification of halloysite nanotubes can be conduct in outer surface or inner lumen. The type of surface modification strategy to be chosen can depend on the type of application required. These modification agents include polymer, nanoparticles, surfactants, Organosilane coupling, Acid etching and Compounds of biological origin14.

Energy and power generations are the basic topics to manage the suitability of industrial society and human lifetime. All actions need energy, comprising of making products, chilling or warming the buildings, driving, and lighting motor systems15. Currently, we rely on energy originations that are nonrenewable to meet most energy requirements. These nonrenewable originations are quickly discharging due to their vast operation16. Additionally, these sources are an essential basis for changing the weather because these fossil combustions are released Carbon dioxide (CO2), which is absolutely destructive to the surroundings17. So, hydrogen energy can be the most challenging source for energy devices in the future18. Hydrogen is identified as a nontoxic and low-priced power origin for static and transferable avails. Hydrogen supplies reproducible energy after ignition19. Scientists have drawn consideration to hydrogen as an encouraging future fuel because of its substantial features. These features are, containing plenty in the world, an undefiled energy source, and the lightest fuel20,21.

Electrode material properties are crucial for the energy storage performance of storage devices. It has been well appointed that nanostructured electrode materials can enhance the capacity and cycle stability of storage devices. Mass transport and electrode kinetics can be elevated by decreasing the charge transportation path and ion diffusion distance. In addition, the cooperation of several mechanisms and storage processes can promote the potential of electrode materials for ion adsorption. In layered materials, especially clay minerals with unique structures, a spillover mechanism can occur by decorating electrocatalyst materials on their surfaces. Adsorbed H2 molecules on the decorated electrocatalyst migrate to the surface of clay minerals, and hydrogen can be transported on a surface to another surface. Additionally, designing carbon bridges between the dissociation source (electrocatalyst) and receptor (clay) leads to diffusion. Graphene quantum dots (GQDs), as a functional carbon source with distinctive physicochemical properties, play ideal roles in the energy storage process22,23. The presence of GQDs in the texture of electrodes has been reported in previous studies for studying electrochemical energy storage systems such as Li-ion batteries, Li–S batteries, and supercapacitors24,25,26,27,28. Yushan Liu groups reposted the preparation of HNTs/RGO nanocomposites which provided superior performances as electrode material in supercapacitors29. Nano assembly of N-doped graphene quantum dots anchored Fe3O4/halloysite nanotubes designed by Akhilesh BabuGanganboina for high performance supercapacitor30.

According to the mentioned literature, the HNT nanoclay, CoFe2O4 and S, N-GQDs were selected as support, electrocatalyst and conductive receptor components, respectively. Hence, ternary nanocomposites were designed by decorating CoFe2O4 and S, N-GQDs on halloysite nanotubes. CoFe2O4 as a transition metal oxide in the category of spinel materials has been widely utilized in electrochemical energy storage systems31,32. Electrochemical energy storage devices undergo redox reactions with high power, which store electrical charges at the surface and in the structure pores33. The achieved ternary CoFe2O4/S, N-GQD/HNT nanocomposites were prepared through a green hydrothermal method with synergistic spillover mechanisms, redox processes and physical adsorption as potential hydrogen storage materials. Decoration of the S, N-GQD layer as a conductive receptor and CoFe2O4 nanoparticles as an electrocatalyst on halloysite nanotubes was investigated using structural analysis of XRD, FE-SEM, TEM, FT-IR and EDS. The electrochemical abilities of the resulting composites were compared to reach ideal electrode materials in terms of function, mechanism and performance.

The halloysite nanotubes were investigated in terms of morphology and purity using FE-SEM micrographs and XRD diffractograms. The schematic diagram for decoration process of S, N-GQDs and CoFe2O4 nanoparticles on halloysite nanotubes is presented in Fig. 1a–c. Also, the mechanism for hydrogen storage process through spillover represented in Fig. 1d and e. As shown in Fig. S1a and b, the structure of halloysite is nanotubes with different lengths34. Additionally, the XRD diffractogram for pristine HNTs is shown in Fig. S1c, which confirms the structure of Al2Si2O5 (OH)4 with a reference code of 29–1487. The peak at 2Ɵ = 25 degrees is present in the texture of halloysite nanotube minerals related to SiO2 (JCPDS = 82-1554), which is available in clay materials35,36. The purity of the as-fabricated pure S, N-GQDs and S, N-GQDs/HNTs nanocomposite samples was studied and is shown in Fig. 2a and b using XRD technique. Figure 2a displays a broad peak at approximately 15–25 degrees of carbon texture, which supports the formation of graphene quantum dots from red onion juice in the hydrothermal process. In addition, the formation of S, N-GQDs on the halloysite nanotube substrate was confirmed by investigation of the XRD diffractogram in Fig. 2b. Figure 2b simultaneous displays the sharp peaks of aluminum silicate hydroxide (29-1487) and silica (82-1554) and a broad peak of carbon (08-0415). In addition, Fig. 3a and b illustrates the XRD diffractograms for CoFe2O4/HNTs and CoFe2O4/S, N-GQDs/HNTs, respectively. The presence of cobalt ferrite with a crystal system of cubic (JCPDS = 02-1045) and halloysite nanotubes is available in these two XRD patterns.

(a–c) Decoration of S, N-GQDs and CoFe2O4 nanoparticles on the HNT substrate and (d, e) Spillover mechanism of CoFe2O4/S, N-GQDs/HNTs for hydrogen storage.

XRD diffractograms of (a) pristine S, N-doped GQDs and (b) S, N-GQD/HNT nanocomposites.

XRD diffractograms of (a) CoFe2O4/HNTs and (b) CoFe2O4/S, N-GQD/HNT nanocomposites.

The morphologies of the designed samples, such as S, N-GQDs/HNTs, CoFe2O4/HNTs and CoFe2O4/S, N-GQDs/HNTs nanocomposites, are shown in Fig. 4 in different magnifications of 1 µm and 200 nm. Figure 4a and b shows the cover of GQDs on the nanotube of Halloysite clay. The formation of CoFe2O4 nanoparticles on the HNT structures is displayed in Fig. 4c and d and the creation of CoFe2O4 and S, N-GQDs on the HNT substrate are displayed in Fig. 4e and f, which leads to the formation of a string of particles on the HNT substrate. Figure 5a–d displays TEM images of designed ternary nanocomposites at various magnifications. The images clearly show the decoration of CoFe2O4 nanoparticles and S, N-GQDs on the halloysite nanotube substrate. All three components of HNTs, S, N-GQDs and CoFe2O4 structures are specified in the TEM images. The nanotubes related to halloysite structures and observed particles refer to CoFe2O4 nanostructures. The measured d-spacing of 0.332 nm correlated with the lattice fringes of CoFe2O4 is indexed to the lattice spacing of (220) given in Fig. 5d. To better explain the decoration process of S, N-GQDs and CoFe2O4 nanoparticles on halloysite nanotubes, a schematic diagram is drawn and presented in Fig. 1a–c. This schematic clarified the step-by-step synthesis function in detail.

FE-SEM micrographs of (a, b) S, N-GQDs/HNTs, (c, d) CoFe2O4/HNTs and (e, f) CoFe2O4/S, N-GQDs/HNTs nanocomposites.

(a–d) TEM images of CoFe2O4/S, N-GQD/HNT nanocomposites at different magnifications.

FT-IR analysis was applied for the detection of chemical bands of samples and is shown in Fig. 6a–d. Figure 6a–d shows the FT-IR spectra of pristine pure S, N-GQDs, pure HNTs, N, S-GQDs/HNTs and CoFe2O4/S, N-GQDs/HNTs. As seen in the FT-IR spectrum of HNT clay, stretching and bending bonds of Al2OH were located at 3695, 3621 and 911 cm−1, respectively. The obtained peaks at 753, 691 and 537 cm−1 are related to bending bonds of Si–O-Al. The bonds at 1033 cm−1 refer to Si–O and OH vibrations in the halloysite units that appear at 791 cm−137,38. Metal-oxide vibrations (465 and 539 cm−1) in cobalt ferrite and halloysite overlap with each other. The resulting peaks at 1385, 1614 and 2925 cm−1 represent the functional groups of GQDs, such as =C–H, C–N, C=O, C–H and C–OH39. Elemental analysis of pristine S, N-GQDs and nanocomposites of CoFe2O4/S, N-GQDs/HNTs is shown in Fig. S2a and b using EDS technique. The presence of sulfur and nitrogen in the EDS analysis of GQDs confirms the formation of S- and N-doped graphene quantum dots. In addition to S, N, and C, the presence of Al, Si, Co, Fe and O affirms the texture of HNTs and CoFe2O4 in the ternary nanocomposites.

FT-IR spectra of (a) pristine S, N-GQDs, (b) pristine HNTs, (c) S, N-GQDs/HNTs and (d) CoFe2O4/S, N-GQDs/HNTs nanocomposites.

Chemical composition of onion includes several carboxylic acids, sugars, etc. Seven organic acids were identified and quantified in onion samples such as Malic acid, Citric acid, Tartaric acid, Oxalic acid, Ascorbic acid, Succinic acid and Pyruvic acid. Also, sulfur and nitrogen containing compounds detected in the onion extract as organosulfur and amino acids. These compounds consist of 1-Propanethiol, Propylene sulfide, Dimethyl sulfide, Aspartic acid, Serin and, etc.40,41.

The possible mechanism of formation of GQDs from the organic acids was explained as follows; the organic acids such as tartaric acid or ascorbic acids when heated at their melting temperature decomposes and the hydronium ion formed from the acid, acted as a catalyst in subsequent decomposition reaction stages. The significant path in mechanism was that the condensation and cyclo-addition followed by the formation of aromatization and aromatic clusters. During the pyrolysis, adjacent dehydrated acid molecules reacted with each other to form GQDs and the functional groups located at the edge of each GQDs acts as passivation layer at the surface42. Additionally, presence of sulfur or nitrogen source along with carbon sources leads to formation of S, N doped GQDs. The compounds of thiamine or pantothenic acid in the onion extract appear to be responsible for doping the S or N in the GQDs structures43.

The surface specifications were determined by the BET method to compare the surface data of pristine HNTs and representative nanocomposites of CoFe2O4/S, N-GQDs/HNTs. Surface characterization in terms of specific surface area and porosity is an essential factor for ion adsorption and insertion on the surface or in pores. Therefore, the resulting data can act as important properties for energy storage materials. As seen in Fig. S3a and c, a typical type-IV isotherm can be determined for two BET plots. The obtained isotherms have H3 hysteresis loop. The type-IV isotherm is defined for the materials by mesoporous structures44. The specific surface area, total pore volume and average pore diameter for pristine HNTs and nanocomposites of CoFe2O4/S, N-GQDs/HNTs are summarized in Table S1. The pore size distribution for the samples is shown in Fig. S3b and d. The pore size distribution for pristine HNTs showing broad pore size distribution in the range of 1–55 nm with maximum around pores of 2 nm diameter (Fig. S3b). As shown in Fig. S3d, the pore size distribution for CoFe2O4/S, N-GQDs/HNTs nanocomposites in the range of 1–45 nm presents the maximum around pores of 40 nm. According to the specific surface area data, by decorating CoFe2O4 nanoparticles and S, N-GQDs on Halloysite clay, the surface of Halloysite decreases due to covering the surface of HNTs by CoFe2O4 and S, N-GQD components.

Electrochemical hydrogen storage (EHS) capacity is an appropriate criterion for comparing the behavior of active materials in the working electrode for the sorption of hydrogen through the charge–discharge chronopotentiometry (CP) technique. To check this criterion, the designed active materials on the substrate of HNTs were examined in terms of hydrogen storage capacity against pristine HNTs. The discharge profiles for the designed samples of CoFe2O4/HNTs, S, N-GQDs/HNTs and CoFe2O4/S, N-GQDs/HNTs are presented in Fig. 7b–d, respectively. As seen in Fig. 7a, the discharge profile for pristine HNTs expresses a discharge capacity of 300 mAhg-1 after 20 cycles at a current density of 1 mA. The presence of CoFe2O4 on the surface of halloysite nanotubes can increase the capacity of HNTs to 450 mAhg−1 due to the electrocatalytic task of CoFe2O4 in the spillover mechanism of clay nanotubes. Additionally, the S, N-GQD/HNT composites show a discharge capacity of 466 mAhg−1 after 20 cycles. The simultaneous role of CoFe2O4 and S, N-GQDs on the surface of HNTs can increase the hydrogen storage capacity of HNTs to 600 mAhg−1 by applying a 1 mA current density in a 2 M KOH electrolyte.

Discharge profiles of (a) pristine HNTs, (b) CoFe2O4/HNTs, (c) S, N-GQDs/HNTs, (d) CoFe2O4/S, N-GQDs/HNTs nanocomposites and (e) comparative cyclic voltammetry (CV) curve for pristine HNTs and CoFe2O4/S, N-GQDs/HNTs nanocomposites.

The role of hydrogen spillover in hydrogen storage capacity enhancement is still disputable due to lack of understanding of the exact mechanism, and the contrary results on the hydrogen uptake characteristics. Spillover is the dissociation of the hydrogen molecules into atoms by transition metals and subsequent diffusion of these atoms to the host material, in which hydrogen atoms can hydrogenate the unsaturated C–C bonds (i.e., activated carbon, graphite, and single walled carbon nanotubes) or the benzene ring (i.e., MOFs, COFs, and polymers). Among the various steps of spillover, dissociation of hydrogen molecules and diffusion of hydrogen atoms are considered as instantaneous and barrierless, respectively; however, hydrogen atoms need to overcome high energy barriers for migration to the host material which makes migration the rate limiting step. Therefore, minimum clustering and fine molecular level dispersion of transition metals within the host material is desirable to make the migration path as short as possible45. Spillover is a conceivable mechanism in hydrogen sorption systems that comprise electrocatalysts to dissociate H2 to H atoms. In the spillover concept, adsorbed hydrogen on the electrocatalyst migrates to the surface of support materials such as carbon or layered structures such as graphite or clay, and hydrogen can transport on a surface to another surface. Spillover processes occur in the CoFe2O4/HNT and CoFe2O4/S, N-GQD/HNT composites when hydrogen is adsorbed on the CoFe2O4 nanoelectrocatalysts and two-step spillover occurs. Primary spillover occurs through transportation of atomic hydrogen from the electrocatalyst nanoparticle to the support, and secondary spillover occurs through transportation of hydrogen to the receptor (HNT). The diffusion procedure is obligatory for secondary spillover46. Therefore, the formation of carbon bridges (S, N-GQDs) between the dissociation source (CoFe2O4) and receptor (HNTs) leads to diffusion. Secondary spillover was substantiated to develop the hydrogen storage capacity by mixing the adsorbent with a catalyst that is capable of dissociating hydrogen47,48. The explained spillover mechanism in the CoFe2O4/S, N-GQDs/HNTs nanocomposites is shown in detail in Fig. 1d and e.

In addition to the role of the carbon bridge of S, N-GQDs in the spillover mechanism, the hydrogen sorption ability in the presence of codoped doped GQDs (CoFe2O4/S, N-GQDs/HNTs) is better than that of CoFe2O4/HNTs owing to the electron transfer in the S, N-GQD-based electrodes being properly quick. The formation of S, N-GQDs on electrodes can alter the discharge capacity because of the numerous edge areas produced by small sized S, N-GQDs and the adequate conductivity correlated to CoFe2O4 bond structures. The high efficiency of CoFe2O4/S, N-GQDs/HNTs can be elucidated owing to the trap states formed by both dopants and edge states, which can adsorb charge carriers to increase the storage capability. The electron density of graphene layers can be modified through doping by electron acceptor or electron donor species. Sulfur or nitrogen as heteroatoms in the graphene structure can be replaced with carbon atoms. Therefore, electron migration occurs, which leads to the creation of electrons and holes. This structure alters with cooperating S, N-GQDs and plays a great role in electrochemical and electrocatalyst systems for energy storage applications22,49. Additionally, nitrogen as a donor atom with the ability to electronically modify graphene can improve the conductivity and catalysis behaviors of graphene structures50,51.

Operation of hydrogen sorption in metal oxides situates through physisorption. The produced H+ from aqueous electrolyte adsorbs on the surface of the metal oxide (charge process). During the discharge path, H2 migrates from the working electrode under alkaline circumstances and becomes water again while freeing an electron. In the next step, adsorbed hydrogen on the electrocatalyst of metal oxides migrates from nanoparticles to the surface of the carbon support, and hydrogen can be transported on a surface to another surface52.

Actually, the Heyrovsky process occurred due to the suitable electrocatalytic activity of synthesized CoFe2O4 nanoparticles53. The synergic effect of Tafel [Eq. (2)]54 and Heyrovsky [Eq. (3)] process leads to hydrogen storage in the active materials.

According to Eq. (4), the electrolyte of KOH dissociated and the ions of OH− and H+ were produced during the charge direction. Next, the produced H+ migrates to the working electrode. In the cathodic reaction, the H+ adsorbs on the surface of active materials. During an oxidization process and anodic reaction, the charging mechanism was performed in the counter electrodes (Pt). During the discharge direction, the stored H2 in the working electrode migrates through freeing an electron under alkaline circumstances and water is again produced. The Fe3+ as a central metal ion is reduced to Fe2+ [Eq. (5)]. Finally, the adsorbing H+ can equilibrate the total charge of CoFe2O4. The Fe-H bonds created in terms of construction favored the formation of OH− ions with a reduction in the redox couple of Fe3+/Fe2+.

The electroanalytical technique of cyclic voltammetry (CV) was customarily employed for the comparative study of electrode material attributes. Fascinating and effective scientific insights can be provided by associating the attributes of the material, such as structure and morphology, with their electrochemical response. The electrochemical response of HNTs decorated with CoFe2O4 and GQDs was investigated by CV for comparison with pristine HNTs. Figure 7e exhibits the CV curves for the pristine HNTs and representative nanocomposites of CoFe2O4/S, N-GQDs/HNTs over a potential region of − 1.1 to − 0.2 V. The electrode response (anodic and cathodic peaks) for all samples is listed in Table S2. The CoFe2O4/S, N-GQDs/HNT nanocomposites express a better electrode response than pristine HNTs. It is fascinating to note that covering S, N-GQDs on HNT structures modifies the electrochemical attributes of the as-fabricated electrode materials for energy storage applications. Additionally, CoFe2O4 as an electrocatalyst can improve the energy storage mechanism, which is compatible with chronopotentiometry charge–discharge results.

Halloysite nanoclay as a unique substrate shows favorable properties in terms of hydrogen adsorption using incorporating physisorption and spillover mechanisms. The green synthesized Sulfur and Nitrogen co-doped graphene quantum dots as conductive components and cobalt ferrite nanoparticles as electrocatalyst was decorated on the halloysite substrate. The morphology and purity of designed ternary nanocomposites confirm the presence of CoFe2O4 and S, N-GQDs on the HNTs substrate. The halloysite and treated halloysite show hydrogen storage capacity of 300 and 600 mAhg−1 compared to each other in the 2 M KOH electrolyte after 20 cycles at a current of 1 mA through the charge/discharge chronopotentiometry method. As a result, the fabricated CoFe2O4/S, N-GQS/HNTs nanocomposites provide a facile process for the reflective plan of potential compounds for energy storage devices.

The chemical precursors and starting materials utilized in the synthesis process of samples, including halloysite nanotubes (HNTs), FeCl3·6H2O, Co(CH3CO2)2·4H2O, CTAB and NaOH, were purchased from a Merck company and applied without further purification. XRD diffractograms were recorded by an X-ray diffractometer device using Ni-filtered Cu Ka radiation (Philips-X’pertpro). FT-IR spectra were obtained on a Nicolet Magna-550 spectrometer in KBr pellets. SEM micrographs were obtained on a LEO-1455VP equipped with energy dispersive X-ray spectroscopy. EDS analysis with a 20 kV hasten voltage was performed. TEM images were captured on a Philips EM208 transmission electron microscope with an accelerating voltage of 200 kV. The BET analysis was conducted at − 196 °C using an automated gas adsorption analyzer (Tristar 3000, Micromeritics). The distribution of pore size was measured by applying the desorption branch of the isotherm in the BJH method.

The red onion was selected as the green source for the synthesis of graphene quantum dots using a hydrothermal procedure. To use onion extract, the fresh red onion was squeezed, and the onion juice was filtered from the pulps. The red onion juice was filtered again and transferred to a 50 ml sealed autoclave and heated for 8 h at 180 °C. The obtained product was filtered, and the GQD solution was separated from the resulting powders. The obtained solution contains an S, N-codoped GQD solution.

To synthesize S, N-GQDs on the substrate of halloysite nanotubes, 0.2 g HNTs were dispersed in 50 ml diluted red onion juice using an ultrasonic bath. The prepared mixture was transferred to a sealed autoclave and heated for 8 h at 180 °C. Finally, the resulting products of S, N-GQDs/HNTs were dried for 24 h at 80 °C in a vacuum oven.

The S, N-GQD/HNT powders provided in "Electrochemical details" were used as substrates for the synthesis of CoFe2O4 nanoparticles. S (0.02 g), N-GQD/HNT powders ultrasonically dispersed in DI water. Then, the mixed solution comprises 0.13 g FeCl3·6H2O, 0.10 g Co(CH3CO2)2·4H2O and 0.13 g CTAB in DI water prepared and added to the dispersed solution of S, N-GQDs/HNTs. The pH of the provided mixture was adjusted to 11 using NaOH and stirred for 20 min. Finally, the resulting mixture was transferred to a sealed autoclave and heated for 15 h at 150 °C. The prepared CoFe2O4 on the substrate of S, N-GQDs/HNTs were centrifuged and dried at 60 °C in an oven.

The collected cells possessed the resulting electrode material for the working electrode, platinum plate as a counter electrode, Ag/AgCl as a reference electrode and KOH in DI water as the electrolyte. The working electrode was designed by coating the synthesized materials on the copper substrate. In three-electrode cells, it is necessary to calculate the potential changes of the working electrode, so this change is studied with respect to a reference electrode (a potentially defined electrode). These electrodes provide the facility of specifying the working electrode potential by providing constant and repeatable potential. Ag/AgCl electrodes are the most widely used reference electrodes in this system55. These resulting copper substrates were applied as working electrodes in three-electrode hydrogen storage cells. Galvanostatic charge–discharge investigations were performed on the SAMA 500 testing device at desired current densities. Cyclic voltammogram experiments for the obtained electrodes were performed in similarly collected cells at a scan rate of 0.10 Vs−1.

A Correction to this paper has been published:

Ummartyotin, S., Bunnak, N. & Manuspiya, H. A comprehensive review on modified clay based composite for energy based materials. Renew. Sustain. Energy Rev. 61, 466–472 (2016).

CAS Google Scholar

Chen, C., Ma, Y. & Wang, C. Investigation of electrochemical performance of montmorillonite clay as Li-ion battery electrode. Sustain. Mater. Technol. 19, e00086 (2019).

CAS Google Scholar

Voronin, D., Ivanov, E., Gushchin, P., Fakhrullin, R. & Vinokurov, V. Clay composites for thermal energy storage: A review. Molecules 25, 1504 (2020).

CAS Google Scholar

Lan, Y. et al. Natural clay-based materials for energy storage and conversion applications. Adv. Sci. 1, 2004036 (2021).

Google Scholar

Yendluri, R., Otto, D. P., De Villiers, M. M., Vinokurov, V. & Lvov, Y. M. Application of halloysite clay nanotubes as a pharmaceutical excipient. Int. J. Pharm. 521, 267–273 (2017).

CAS PubMed Google Scholar

Kornilova, A. et al. Gold nanoparticles immobilized on halloysite nanotubes for spatially-temporally localized photohyperthermia. Appl. Surf. Sci. 566, 150671 (2021).

CAS Google Scholar

Stavitskaya, A. V. et al. Ru/CdS quantum dots templated on clay nanotubes as visible-light-active photocatalysts: Optimization of S/Cd ratio and Ru content. Chem. A Eur. J. 26, 13085–13092 (2020).

CAS Google Scholar

Stavitskaya, A. et al. Ruthenium-loaded halloysite nanotubes as mesocatalysts for Fischer–Tropsch synthesis. Molecules 25, 1764 (2020).

CAS PubMed Central Google Scholar

Fatnassi, M., Solterbeck, C.-H. & Es-Souni, M. Clay nanomaterial thin film electrodes for electrochemical energy storage applications. RSC Adv. 4, 46976–46979 (2014).

ADS CAS Google Scholar

Massaro, M., Noto, R. & Riela, S. Past, present and future perspectives on halloysite clay minerals. Molecules 25, 4863 (2020).

CAS PubMed Central Google Scholar

Liu, M., Jia, Z., Jia, D. & Zhou, C. Recent advance in research on halloysite nanotubes-polymer nanocomposite. Prog. Polym. Sci. 39, 1498–1525. (2014).

Article CAS Google Scholar

Liu, M., Zhang, Y. & Zhou, C. Nanocomposites of halloysite and polylactide. Appl. Clay Sci. 75–76, 52–59. (2013).

Article ADS CAS Google Scholar

Du, M., Guo, B., Lei, Y., Liu, M. & Jia, D. Carboxylated butadiene–styrene rubber/halloysite nanotube nanocomposites: Interfacial interaction and performance. Polymer 49, 4871–4876. (2008).

Article CAS Google Scholar

Tharmavaram, M., Pandey, G. & Rawtani, D. Surface modified halloysite nanotubes: A flexible interface for biological, environmental and catalytic applications. Adv. Coll. Interface. Sci. 261, 82–101. (2018).

Article CAS Google Scholar

Omer, A. M. Green energies and the environment. Renew. Sustain. Energy Rev. 12, 1789–1821 (2008).

CAS Google Scholar

Jacobson, M. Z. Evaluation of proposed solutions to global warming, air pollution, and energy security. AGUFM 2008, U53B (2008).

Google Scholar

Kondratenko, E. V., Mul, G., Baltrusaitis, J., Larrazábal, G. O. & Pérez-Ramírez, J. Status and perspectives of CO2 conversion into fuels and chemicals by catalytic, photocatalytic and electrocatalytic processes. Energy Environ. Sci. 6, 3112–3135. (2013).

Article CAS Google Scholar

Durbin, D. & Malardier-Jugroot, C. Review of hydrogen storage techniques for on board vehicle applications. Int. J. Hydrogen Energy 38, 14595–14617 (2013).

CAS Google Scholar

Jain, I. Hydrogen the fuel for 21st century. Int. J. Hydrogen Energy 34, 7368–7378 (2009).

CAS Google Scholar

Karami, M., Ghanbari, M., Alshamsi, H. A., Ghiyasiyan-Arani, M. & Salavati-Niasari, M. The effect of CuI–PbI2 nanocomposite fabricated by the sonochemical route on electrochemical hydrogen storage characteristics. Int. J. Hydrogen Energy 46, 19074–19084. (2021).

Article CAS Google Scholar

Zhang, L. et al. Clay mineral materials for electrochemical capacitance application. J. Electrochem. Soc. 168, 0550778 (2021).

Google Scholar

Jia, H. et al. Heterostructural graphene quantum dot/MnO2 nanosheets toward high-potential window electrodes for high-performance supercapacitors. Adv. Sci. 5, 1700887 (2018).

Google Scholar

Ganganboina, A. B., Dutta Chowdhury, A. & Doong, R.-A. New avenue for appendage of graphene quantum dots on halloysite nanotubes as anode materials for high performance supercapacitors. ACS Sustain. Chem. Eng. 5, 4930–4940. (2017).

Article CAS Google Scholar

Chao, D. et al. Graphene quantum dots coated VO2 arrays for highly durable electrodes for Li and Na ion batteries. Nano Lett. 15, 565–573 (2015).

ADS CAS PubMed Google Scholar

Luo, J. et al. Graphene quantum dots encapsulated tremella-like NiCo2O4 for advanced asymmetric supercapacitors. Carbon 146, 1–8 (2019).

CAS Google Scholar

Park, J. et al. Graphene quantum dots: structural integrity and oxygen functional groups for high sulfur/sulfide utilization in lithium sulfur batteries. NPG Asia Mater. 8, e272–e272 (2016).

CAS Google Scholar

Ellabban, O., Abu-Rub, H. & Blaabjerg, F. Renewable energy resources: Current status, future prospects and their enabling technology. Renew. Sustain. Energy Rev. 39, 748–764 (2014).

Google Scholar

Fleischmann, S. et al. Pseudocapacitance: From fundamental understanding to high power energy storage materials. Chem. Rev. 120, 6738–6782. (2020).

Article CAS PubMed Google Scholar

Liu, Y. et al. Halloysite nanotubes@ reduced graphene oxide composite for removal of dyes from water and as supercapacitors. J. Mater. Chem. A 2, 4264–4269 (2014).

ADS CAS Google Scholar

Ganganboina, A. B., Chowdhury, A. D. & Doong, R.-A. Nano assembly of N-doped graphene quantum dots anchored Fe3O4/halloysite nanotubes for high performance supercapacitor. Electrochim. Acta 245, 912–923 (2017).

CAS Google Scholar

Gholami, T., Salavati-Niasari, M. & Varshoy, S. Electrochemical hydrogen storage capacity and optical properties of NiAl2O4/NiO nanocomposite synthesized by green method. Int. J. Hydrogen Energy 42, 5235 (2017).

CAS Google Scholar

Xu, K. et al. Construction of rGO-encapsulated Co3O4-CoFe2O4 composites with a double-buffer structure for high-performance lithium storage. Small 1, 2101080 (2021).

Google Scholar

Gao, H., Liu, S., Li, Y., Conte, E. & Cao, Y. A critical review of spinel structured iron cobalt oxides based materials for electrochemical energy storage and conversion. Energies 10, 1787 (2017).

Google Scholar

Huang, B., Liu, M. & Zhou, C. Cellulose–halloysite nanotube composite hydrogels for curcumin delivery. Cellulose 24, 2861–2875 (2017).

CAS Google Scholar

Deen, I., Pang, X. & Zhitomirsky, I. Electrophoretic deposition of composite chitosan–halloysite nanotube–hydroxyapatite films. Colloids Surf. A 410, 38–44 (2012).

CAS Google Scholar

Luo, P. et al. Study on the adsorption of neutral red from aqueous solution onto halloysite nanotubes. Water Res. 44, 1489–1497 (2010).

CAS PubMed Google Scholar

Ghiyasiyan-Arani, M. & Salavati-Niasari, M. Effect of Li2CoMn3O8 nanostructures synthesized by a combustion method on montmorillonite K10 as a potential hydrogen storage material. J. Phys. Chem. C 122, 16498–16509 (2018).

CAS Google Scholar

Arat, R. & Uyanık, N. Surface modification of nanoclays with styrene-maleic anhydride copolymers. Nat. Resour. 8, 159 (2017).

CAS Google Scholar

Ghiyasiyan-Arani, M. & Salavati-Niasari, M. Strategic design and electrochemical behaviors of Li-ion battery cathode nanocomposite materials based on AlV3O9 with carbon nanostructures. Compos. B Eng. 183, 107734 (2020).

CAS Google Scholar

Liguori, L. et al. Chemical composition and antioxidant properties of five white onion (Allium cepa L.) landraces. J. Food Qual. 2017, 1–9 (2017).

Google Scholar

Jeong, C.-H., Kim, J.-H. & Shim, K.-H. Chemical components of yellow and red onion. J. Korean Soc. Food Sci Nutr. 35, 708–712 (2006).

CAS Google Scholar

Naik, M. J. P., Mandal, P., Debbarma, J. & Saha, M. Graphene quantum dots (GQDs) from organic acids. Appl. Innov. Res. 1, 128–134 (2019).

Google Scholar

Anh, N. T. N., Chang, P.-Y. & Doong, R.-A. Sulfur-doped graphene quantum dot-based paper sensor for highly sensitive and selective detection of 4-nitrophenol in contaminated water and wastewater. RSC Adv. 9, 26588–26597 (2019).

ADS Google Scholar

Leofanti, G., Padovan, M., Tozzola, G. & Venturelli, B. Surface area and pore texture of catalysts. Catal. Today 41, 207–219 (1998).

CAS Google Scholar

Demirocak, D. E. et al. Spillover enhancement for hydrogen storage by Pt doped hypercrosslinked polystyrene. Int. J. Hydrogen Energy 37, 12402–12410. (2012).

Article CAS Google Scholar

Lachawiec, A. J., Qi, G. & Yang, R. T. Hydrogen storage in nanostructured carbons by spillover: Bridge-building enhancement. Langmuir 21, 11418–11424 (2005).

CAS PubMed Google Scholar

Wang, L. & Yang, R. T. New sorbents for hydrogen storage by hydrogen spillover: A review. Energy Environ. Sci. 1, 268–279 (2008).

CAS Google Scholar

Jin, J., Fu, L., Yang, H. & Ouyang, J. Carbon hybridized halloysite nanotubes for high-performance hydrogen storage capacities. Sci. Rep. 5, 1–10 (2015).

Google Scholar

Saidi, W. A. Oxygen reduction electrocatalysis using N-doped graphene quantum-dots. J. Phys. Chem. Lett. 4, 4160–4165 (2013).

CAS Google Scholar

Miah, M., Bhattacharya, S., Gupta, A. & Saha, S. K. Origin of high storage capacity in N-doped graphene quantum dots. Electrochim. Acta 222, 709–716 (2016).

CAS Google Scholar

Liu, Q. et al. Graphene quantum dots for energy storage and conversion: From fabrication to applications. Mater. Chem. Front. 4(2), 421–436 (2020).

CAS Google Scholar

Ghiyasiyan-Arani, M. & Salavati-Niasari, M. New nanocomposites based on Li–Fe–Mn double spinel and carbon self-doped graphitic carbon nitrides with synergistic effect for electrochemical hydrogen storage application. Ind. Eng. Chem. Res. 58, 23057–23067 (2019).

CAS Google Scholar

Heyrovsky, J. Elektrolysa se rtu tovou Kapkovou kathodou. Chemistry 16, 256–264 (1922).

Google Scholar

Jurewicz, K., Frackowiak, E. & Béguin, F. Enhancement of reversible hydrogen capacity into activated carbon through water electrolysis. Electrochem. Solid State Lett. 4, A27 (2001).

CAS Google Scholar

Gholami, T. & Pirsaheb, M. Review on effective parameters in electrochemical hydrogen storage. Int. J. Hydrogen Energy 46(1), 783–795 (2020).

Google Scholar

Download references

Professor Masoud Salavati-Niasari and coauthors of the Institute of Nano Science and Nano Technology, University of Kashan, IRAN, are kindly acknowledged for providing access to the analysis facility by Grant No. (159271/MG8) from University of Kashan and the council of Iran National Science Foundation (INSF) by Grant No. (97017837).

Institute of Nano Science and Nano Technology, University of Kashan, P. O. Box. 87317-51167, Kashan, Islamic Republic of Iran

Maryam Ghiyasiyan-Arani & Masoud Salavati-Niasari

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

M.S.N. and M.G.A. conceived the idea. M.G.A. conducted the experiments, characterized the products and wrote the manuscript. All authors reviewed the manuscript.

Correspondence to Maryam Ghiyasiyan-Arani or Masoud Salavati-Niasari.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

The original online version of this Article was revised: In the original version of this Article, Masoud Salavati-Niasari was omitted as a corresponding author. Correspondence and requests for materials should also be addressed to [email protected] .In addition, the original version of this Article contained an error in the Acknowledgments section. "Professor Masoud Salavati-Niasari and coauthors of the Institute of Nano Science and Nano Technology, University of Kashan, IRAN, are kindly acknowledged for providing access to the analysis facility by Grant No. 97014327 from University of Kashan and the council of Iran National Science Foundation (INSF) by Grant No. 99019327." now reads: "Professor Masoud Salavati-Niasari and coauthors of the Institute of Nano Science and Nano Technology, University of Kashan, IRAN, are kindly acknowledged for providing access to the analysis facility by Grant No. (159271/MG8) from University of Kashan and the council of Iran National Science Foundation (INSF) by Grant No. (97017837)."

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit

Reprints and Permissions

Ghiyasiyan-Arani, M., Salavati-Niasari, M. Decoration of green synthesized S, N-GQDs and CoFe2O4 on halloysite nanoclay as natural substrate for electrochemical hydrogen storage application. Sci Rep 12, 8103 (2022).

Download citation

Received: 25 November 2021

Accepted: 03 March 2022

Published: 16 May 2022


Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

Scientific Reports (2023)

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.